Edge RED1800.1 3,600 Watts Class-D Strappable Car Audio Mono-block Subwoofer Amplifier, 1 Ohm Stable, Remote Bass Knob Included
About This Item:
Class-D Mono-block Subwoofer Amplifier, RMS 3,600 Watts@2Ohm Linked, RMS 2,500 Watts@4Ohm Linked, RMS 1800 Watts x 1@1 Ohm; RMS 1200 Watts x 1@2Ohm; RMS 650 Watts x 1@4Ohm. Edge mono amplifiers are stable down to ONE Ohm, giving you the freedom to put even more subs in your system.
This RED1800.1 monoblock amplifier is strappable (bridgeable) with slave/master switch, so that you can get more power output.
Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.
Edge mono amplifiers come with bass remote control. It has Use it to customize your bass on the fly with just a turn of a knob.
You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
Dimensions: 17.7" x 7.6" x 2.2" (450mm x 193mm x 56mm)
Introductions:
Edge engineered the RED1800.1 Class D mono-block subwoofer amplifier to be dominant in both power and reliability. The RED1800.1D is 1-Ohm stable and utilizes a wide array premium components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 1800 watts RMS power at a 1-ohm load.
Especially, this mono amp is strappable (bridgeable). Strapping will give you twice the power and double the impedance load compared to having one single amplifier. If you have a 1,800w amplifier at 1 ohm, and you strap it with an identical amplifier at 1ohm, you'll have 3,600w at 2ohm. Each amp will still be responsible for handling it's own 1,800w at 1ohm, but together they're sending out twice as much energy.
Furthermore, the oversized 1/0 gauge power and ground terminals found on the amplifier allow for maximum current flow. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
In addition to all of the above features, this model also features 4-way protection circuitry, including electrical shortage, overheating, low voltage, and more.
Specification:
1-Ohm Stable Car Subwoofer Amplifier
Class-D Monoblock Subwoofer Amplifier
4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
RMS Power at 1 Ohm: 1,800 Watts x 1 Channel (14.4v)
RMS Power at 2 Ohms: 1,200 Watts x 1 Channel (14.4v)
RMS Power at 4 Ohms: 650 Watts x 1 Channel (14.4v)
LINKED RMS Power at 2 Ohm: 3,600 Watts x 1 Channel (14.4v)
LINKED RMS Power at 4 Ohm: 2,400 Watts x 1 Channel (14.4v)
High Speed MOSFET Power Supply
Soft Turn on Circuit
Frequency Response: 10Hz - 250Hz
Input Sensitivity: 12V - 0.2V
Signal to Noise Ratio: 97dB
Bass Boost: 0 - 9dB
Low Pass Filter (Variable): 35Hz - 250Hz
Subsonic Filter: 10Hz - 50Hz
Remote Bass Knob & Wire Included
1/0 Gauge Power and Ground Terminals
Fuse Rating: 130 Amp
Dimensions: 17.7" x 7.6" x 2.2" (450mm x 193mm x 56mm)
MOQ |
500 |
|
| Lead Time: |
45-60days |
|
Company Profile
AVS (Ningbo) Industrial Co. Ltd., under professional standards and mature technology in the field of automation, is rapidly rising in the field of car audio. We dedicated ourselves to the design, development, and production of all kinds of car audio accessories, cables & wires, capacitors, modified connectors, terminals, and other varieties of vehicle frames for electronic products (including GPS vehicle frames, car phones, and PDA supports). Our company also specializes in plastic packaging, PVC pack boxes, cylinders, and many other products. Having accumulated many years of production experience, we are devoted to the wider usage of PVC, PET, PS, PP, flocking, and other sheet products which are asked for great difficulty and high quality.
FAQ
1. who are we?
We are based in Zhejiang, China, started in 2005, sell to Western Europe(11.11%), Eastern Asia(11.11%), Mid East(11.11%), Oceania(11.11%), Africa(11.11%), Southeast Asia(11.11%), Eastern Europe(11.11%), South America(11.11%), North America(11.11%). There are a total of about 101-200 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3. what can you buy from us?
Car audio, car audio accessories, car electronics, car amplifier, car speaker
4. why should you buy from us, not from other suppliers?
n 2001, Edge made its start as an OEM & ODM manufacturer of car audio products. Our vision was to supply high-quality manufacturing enhanced by providing value-added services for our customers. Our services include manufacturing services, product industrial
Audited Supplier 
){kind=link}
){kind=link}